axisymmetric element
英
美
轴对称元
双语例句
- Patch test function for axisymmetric element of conventional and couple stress theory
常规及偶应力轴对称有限元分片检验函数 - A two-dimensional axisymmetric finite element model of sampling tube and sediments is built.
建立了取样管与沉积物接触的二维轴对称有限元模型。 - A Quadrilateral Axisymmetric Element with Rotating Degree of freedom
带转动自由度的轴对称四边形单元 - The axisymmetric finite element analysis of the centrifugal impeller
离心叶轮的轴对称有限元分析 - The spatial axisymmetric finite element model is established.
建立了分析桥梁桩基单桩空间轴对称有限元模型； - In this paper, an axisymmetric finite element analysis is used to investigate the deformation of plunger and plunger sleeve of high pressure fuel pump in diesel engine.
采用轴对称有限元分析方法，对燃油泵柱塞和柱塞套的工作变形进行了分析； - The algorithms for calculating induced potentials and velocities dee to distributed singularity on an axisymmetric element are presented.
本文给出分布在轴对称面元上的奇点在无界域中的诱导速度势和诱导速度计算公式，奇点分布强度在轴向和径向采用高斯分点离散，周向采用富氏级数离散。 - An axisymmetric finite element model is developed to simulate the temperature field of resistant spot welding according to the process of nugget formation of three layers stainless steel sheets.
根据三层不锈钢板电阻点焊熔核形成过程，建立了模拟三层板点焊温度场的轴对称有限元模型。 - The MSC MARC 2000 is employed and an axisymmetric finite element model is used.
计算采用二维轴对称结构模型和MSCMarc2000有限元程序。 - An axisymmetric shell element for both mid-thick and thin shells are presented.
推导了一种中厚壳和薄壳都运用的轴对称壳单元。 - Axisymmetric Finite Element Analysis of Laminated Rubber Bearings
夹层橡胶垫的轴对称有限元分析 - Axisymmetric Boundary Element Analysis of Piston Thermal Stress of Diesel Engine
柴油机活塞热应力轴对称边界元数值分析 - A 4-node axisymmetric solid element is derived by combined hybrid methods in this paper at first.
本文首先利用组合杂交有限元法得出了一个四节点轴对称元。 - The axisymmetric finite element wasn't suitable for shell openings stress analysis, so the submodel method was adopted.
油罐开孔部位的应力不能再采用轴对称有限元法进行计算，为准确有效地计算油罐开孔部位的应力，引入了子模型法。 - Four-node axisymmetric element based upon combined hybrid functional
基于组合杂交变分原理的4节点轴对称元 - The spatial axisymmetric finite element model is established considering the nonlinear of the soil and the interface between pile and soil.
考虑桩周土体及桩–土接触的非线性，建立了空间轴对称有限元模型； - The axisymmetric finite element model was established according to the structure character of the resistance spot single-sided welding tubesheet.
根据管板单边电阻点焊结构特点，建立了轴对称有限元模型。 - False Shear Problem and Axisymmetric Finite Element Formulation
关于轴对称有限单元中的伪剪切问题 - Load transfer is studied by means of an axisymmetric finite element elastoplastic model that includes interface elements for representing slippage, pile-soil separation and soil nonlinear behavior.
通过有限元方法研究了PCC桩的荷载传递机理，考虑了桩土接触面的滑移、脱开和土的非线性。 - The influence coefficient matrix of the linear axisymmetric triangular element and the input vector expression are derived.
推导了轴对称线性三角形元的影响系数矩阵和输入向量公式； - The axisymmetric finite element method was proposed to calculate the whole stress of tank. This method applied the contact element to simulate the interaction between foundation and tank bottom.
采用轴对称有限元法计算了油罐的整体应力，引入接触单元法模拟地基与底板的相互作用。 - Axisymmetric finite element analysis of piezoelectric media
压电材料轴对称有限元分析 - An axisymmetric finite element model was developed to simulate the contact status between electrode and sheet and between sheet and tube during the squeeze stage of sheet-tube single-sided spot welding. Some influencing factors on the contact region and pressure distribution were discussed.
通过建立轴对称有限元模型，对管板单边电阻点焊预压过程中电极与板以及板与管间接触行为进行了研究，系统分析了预压阶段接触区域范围及接触压力分布的影响因素。 - A nonlinear axisymmetric finite element model was built to simulate position on rim, inflation and free rotation of radial tire.
建立一种子午线轮胎的轴对称非线性有限元模型，用以模拟轮胎的轮辋定位充气自由旋转过程。 - Thirdly, the bearing and deformation characteristics of single and group piles are investigated by means of axisymmetric finite element analysis ( FEA) and three-dimensional FEA.
再次，运用二维轴对称有限元法以及三维有限元法，系统分析了挤扩支盘桩单桩和群桩的承载变形性状。 - The penalty function method is used to evaluate the contact force and a finite element formulation and solution algorithm are developed to solve the contact problem between two different type element: Mindlin axisymmetric shell element and solid element.
采用罚函数法计算接触力，推导了Mindlin轴对称壳单元和实体单元两种不同单元类型之间接触摩擦的有限元列式。 - A 4-node axisymmetric solid element is derived by combined hybrid methods. Compatible isoparametric bilinear displacement approximations and the constant stress mode are employed.
利用组合杂交有限元法得到了一个四节点轴对称元，并采用协调等参双线性位移来逼近及分片常数应力模式。 - This two-dimensional axisymmetric finite element model is established with actual process of jacked pile. The soil constitutive models, the initial stress field, the large deformation problem and the pile-soil interface are taken into account.
该模型考虑了土体本构模型、初始应力场、大变形问题和桩土界面问题等问题，真实全面地实现了静压桩连续压入土体的全过程，具有仿真效果。 - It also proves that patch test function for axisymmetric element can not contain constant shear. Shear of constant stess patch test must be zero.
证明了常规轴对称有限元检验函数不含常剪应变项，常应力分片检验的剪应变必为零。 - According to its geometry, structural characteristics and force features, a 2D axisymmetric finite element model of the jacketed penetrator and a 3D vibration analysis model have been established to check its in-bore structural integrity and its vibration performance.
根据杆式***的几何形状、结构特点和承载等要素，建立了该***的二维轴对称动力学分析模型和三维振动分析模型。